MOLDING DIVISION
PRO MOLD. INC. custom molding division began in 1986 and has grown into a busy facility serving many industries. Products made in our facility are consumer visible quality and manufactured to preserve plastics integrity.
We have a very competitive rate and offer outstanding value. In house mold making assures proper maintenance of your tooling.
Quality is Assured with a complete QC LAB, using control charts developed to your specification.
EQUIPMENT LIST
Molding Machines:
| (3) | 110 Ton Pro Max 8 oz. | (1994, 1994, 1998) | |
| (3) | 165 Ton Pro Max 14 oz. | (1995, 1997, 1998) | |
| (1) | 80 Ton Pro Max 4 oz. | (1998) | |
| (1) | 55 Ton Cincinatti 4 oz. | (1995) |
Support Equipment:
| (2) | 100 CFM Whitlock Driers | |
| (5) | Matsui DMZ40 Driers | |
| (2) | Arctic Chillers (Central Chilled Water, Not Tower) | |
| (8) | Thermolators | |
| (1) | HP Granulator | |
| (8) | 1 Zone Temp Controllers | |
| (1) | 5 Zone Temp Controllers | |
| (1) | 100 Lb. Tumbler | |
| Also, Autoloaders, Conveyors, Second Machining. |
MOLD MAKING DIVISION
PRO MOLD. INC. custom molding division began in 1980 and is staffed by six full time Journeyman Mold Makers and an experienced (22 years) Mold Designer, with over 100 years total experience.
We will design and build molds to meet your needs, low volume prototype, to class "A" multi-cavity.
References supplied upon your request. Fax or mail your part print mold design, data file (IGES, DXF, PRT, DWG) today for FAST response (usually within 48 hours).
EQUIPMENT LIST
| (2) | Bridgeport Vertical Mill - CNC | |
| (5) | Bridgeport Vertical Mills with Digital Read Outs | |
| (1) | 17" Morisieki Engine Lathe with DRO | |
| (1) | 14" Cadillac Engine Lathe with DRO | |
| (1) | 12" Second Operation Lathe | |
| (2) | EDM Sinker - Charmilles | |
| (1) | EDM Sinker – Pacific Controls | |
| (1) | Jig Grinder – Moore #2 | |
| (1) | Okamoto 6" x 18" Grinder | |
| (1) | Brown and Sharpe 12" x 24" Surface Grinder | |
| (1) | 6" x 18" Harig Surface Grinder | |
| (3) | 8" x 18" Kent Surface Grinder | |
| (2) | Cut – off saws 8" | |
| (1) | Hermes Engraving Machine | |
| (1) | Sunnen Hone with Complete Tooling | |
| Miscellaneous Tooling to Support All Above Listed Equipment |
INSPECTION EQUIPMENT
| (1) | Nikon 20" Comparator | |
| (1) | Mititoyo Microscope with 0.00005 Readout | |
| (1) | Mititoyo Height Master | |
| (1) | Gage Pins to 0.750 Diameter | |
| (1) | Set Blocks | |
| (Lots) | Deltronic Pins | |
| Also, Micrometers, Indicators, etc. |
415 GRUMMAN DRIVE lRIVERSIDE, CA 92508 l(909) 776-0555 lFAX (909) 776-0303